правильная командная строка ipsetup

[icstiadmin]

Доброго дня

как правильно назначить ip vlan1 свитчу 2900 baseline?

Перебрал много вариантов, но "правильной" командной строки так и не получилось....
по мануалу вроде бы ipsetup ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx, но ругается. см. скрин

[amel27]

icstiadmin, может опечатка?.. пример команды из того же мануала:ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1

[AkP]

Ты забыл "-". пишешь "ip address", а надо "ip-address"

ipsetup

Syntax

ipsetup { dhcp | ip-address ip-address { mask | mask-length } [ default-gateway ip-address ] }
Parameters
dhcp: Specifies the interface to obtain an IP address through DHCP.
ip-address ip-address: Specifies an IP address for VLAN-interface 1 in dotted decimal notation.
mask: Subnet mask in dotted decimal notation.
mask-length: Subnet mask length, the number of consecutive ones in the mask, in the range of 0 to 32.
default-gateway ip-address: Specifies the IP address of the default gateway or the IP address of the
outbound interface. With this argument and keyword combination configured, the command not only
assigns an IP address to the interface, but also specifies a default route for the device.

Description

Use the ipsetup dhcp command to specify VLAN-interface 1 to obtain an IP address through DHCP.
Use the ipsetup ip-address ip-address { mask | mask-length } command to assign an IP address to
VLAN-interface 1.
By default, the device automatically obtains its IP address through DHCP; if fails, it uses the assigned
default IP address.
If there is no VLAN-interface 1, either command creates VLAN-interface 1 first, and then specifies its IP
address.

Examples

# Create VLAN-interface 1 and specify the interface to obtain an IP address through DHCP.
<Sysname> ipsetup dhcp
# Create VLAN-interface 1 and assign 192.168.1.2 to the interface, and specify 192.168.1.1 as the
default gateway.
<Sysname> ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1