angelkas
06-07-2011, 19:58
Процессор: AMD Athlon x2
Видео карта: ATI Radeon 2600 XT
Винчестер: WDC WD3200AAJS-00VWA0
Материнская плата: ASUS
Программное обеспечение: Windows XP SP2
Оперативная память: DDR2 1ГБ
Во время того когда запущена игра начинает виснут игра и через 10 - 15 минут происходит "crash dump" винчестера и выбивает "экран смерти" что делать я даже не знаю. (Играю в героев меча и магии 3 или в футбол PES6 все нормально запускаю Disciples 2 или другие игры все кранты)
В интернете onlain - видео то во время запуска видео комп замаражуется и снова экран смерти.
Вот сообщение экрана смерти их 5:
---------------------------------------------------------1------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: win32k.sys
INVALID_FLOATING_POINT_STATE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000e7 (0x00000001, 0x00000000, 0x00000009, 0x00000000)
*** win32k.sys - Address 0xbf819860 base at 0xbf800000 DateStamp 0x4bdd1cd9
------------------------------------------------2--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77a7925, 0xf76e6880, 0x00000000)
*** watchdog.sys - Address 0xf77a7925 base at 0xf77a7000 DateStamp 0x480254ab
------------------------------------------------3--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77b7925, 0xaa997880, 0x00000000)
*** watchdog.sys - Address 0xf77b7925 base at 0xf77b7000 DateStamp 0x480254ab
------------------------------------------------4--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77a7925, 0xab4a5880, 0x00000000)
*** watchdog.sys - Address 0xf77a7925 base at 0xf77a7000 DateStamp 0x480254ab
------------------------------------------------5--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xc0000005, 0x8052bda0, 0xab5a4b78, 0x00000000)
*** ntoskrnl.exe - Address 0x8052bda0 base at 0x804d7000 DateStamp 0x4b7a8bbf
Видео карта: ATI Radeon 2600 XT
Винчестер: WDC WD3200AAJS-00VWA0
Материнская плата: ASUS
Программное обеспечение: Windows XP SP2
Оперативная память: DDR2 1ГБ
Во время того когда запущена игра начинает виснут игра и через 10 - 15 минут происходит "crash dump" винчестера и выбивает "экран смерти" что делать я даже не знаю. (Играю в героев меча и магии 3 или в футбол PES6 все нормально запускаю Disciples 2 или другие игры все кранты)
В интернете onlain - видео то во время запуска видео комп замаражуется и снова экран смерти.
Вот сообщение экрана смерти их 5:
---------------------------------------------------------1------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: win32k.sys
INVALID_FLOATING_POINT_STATE
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000e7 (0x00000001, 0x00000000, 0x00000009, 0x00000000)
*** win32k.sys - Address 0xbf819860 base at 0xbf800000 DateStamp 0x4bdd1cd9
------------------------------------------------2--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77a7925, 0xf76e6880, 0x00000000)
*** watchdog.sys - Address 0xf77a7925 base at 0xf77a7000 DateStamp 0x480254ab
------------------------------------------------3--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77b7925, 0xaa997880, 0x00000000)
*** watchdog.sys - Address 0xf77b7925 base at 0xf77b7000 DateStamp 0x480254ab
------------------------------------------------4--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: watchdog.sys
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xe0000001, 0xf77a7925, 0xab4a5880, 0x00000000)
*** watchdog.sys - Address 0xf77a7925 base at 0xf77a7000 DateStamp 0x480254ab
------------------------------------------------5--------------------------------------------------------------------------------
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
KERNEL_MODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x1000008e (0xc0000005, 0x8052bda0, 0xab5a4b78, 0x00000000)
*** ntoskrnl.exe - Address 0x8052bda0 base at 0x804d7000 DateStamp 0x4b7a8bbf